The Aesus In-Line High Speed
Premier Capper and re-torquers are for
the discerning customer who does not mind paying a little more
for rugged construction with ease of operation. Everyone says
this, but with this machine it is more than true. We
challenge anyone anywhere to meet the power and quality of
this machine.
Here are a few of the
features…but if you see it you will believe it!
.
Cap Sorter
The Large Cap Sorting Elevator not only elevates
the caps from a convenient loading height for an
operator, but sorts them as it does. It is ideal
for “flat” caps whose height is less than 60% of its
diameter. There is even a cap reject system for an
occasional inverted cap. Caps automatically
re-circulate back into the system’s hopper.
Controls
- User friendly operator interface
Spindles Every tightening station is equipped, as standard,
with easily adjustable mechanical slip clutches, so
that when the correct preset Torque is reached the
clutches will slip. This is to avoid over torque or
scuffing of the caps.
Simple Removal of Components without
Tools
4 " Posts
Note the rugged 4" diameter posts
Capper Belts
Optional dual guide belts that
increased bottle stabilizing
assembly.
Required when unstable or tall and slender bottles
are to be capped.
The heavy duty base has the large access doors ,
even the electrical panel hinges away and yet is
easy to access.
Summary of Excellent Features
Rugged capper that will cap up to speeds of 300 bpm
Can
be equipped with protective outer guarding
Full
“Lexan” Safety Enclosure, for added operator safety
complete with Magnetic Interlock Device for the
Guarding, if a guard is opened while the machine is
running, the interlock will automatically stop the
machine.
Includes
easy adjust thread tightening stations
Motorized height
adjustment
4 sets of spindle
torque wheels
Each spindle comes
as standard with mechanical clutches
Full stainless steel cladding on a
fully welded steel tubular base.
Direct universal drive
shafts
Swing out electrical
panel, offers full access to mechanical components in
capper’s base.
Full access to
electrical components in machine’s base.
Extended in-feed chute
assures proper pickup of cap at the 3-point cap
positioner
One pair of extended in-feed and
exit bottle stabilizing side guide belts assures
complete bottle control during the full capping
process.
Left
to right and right to left machine
configuration
All electronically
controlled variable speed drives for ease of
adjustment.
Machine leveling
screws with floor pads.
Bottle Back up sensors
Optional
Extras
We have many
optional extras to handle special caps or closures,
for example our cap tapper is used for snap type
caps where tightening spindles are not required.
Cap Tapper
Quality Control Reject System, allows
the automatic rejection of 5 bottles following a
machine shutdown or fault. Will detect high cap /
skewed cap and automatically remove them from the
line and onto a stainless steel shelf. Includes
reject confirmation.
