|
Speed
Star Bottle Indexers Speed Star bottle indexers complete with a
mechanical clutch DC drive and mounting bracket limits the
bouncing of containers as they index. It is also useful in
situations where high speed is required to push the containers
through the system with more precision.
|
 |
|
Photo registration for printed sleeve
material |
 |
|
Horizontal perforation assembly |
 |
|
Timing screw indexing drive system with
variable speed controller |
 |
|
Additional size shrinksleeve material change parts |
 |
|
Reject shelf complete with UV sensor
This will detect a spliced material applied to the bottle. A
UV detection system will then send a signal for the bottle to
be automatically rejected with a splice – the material must be
UV impregnated or coated. |
 |
|
Sleeve
Tackers Sleeve tacker
enables the sleeve to be automatically adhered to the
container which reduces the chance of “sleeve float” prior to
or during the shrinking of the sleeve.
It also helps with sleeves that need to be in a specific
position. |
 |
|
Heat
Shrink Tunnel Heat shrink tunnel for neck banding – 3700 Watt with variable
heat control. |
 |
|
Infra-Red Shrink Tunnel Infra-red heat tunnel for neck
banding and full body sleeving complete with stainless steel
electric lift stand and all stainless steel control box. All
stainless steel construction
-
One Temperature controlled
36” long infrared and convection heat zone
-
6” wide x 9” high heated
chamber
-
6 quartz tube heater
elements, 3 on each side
-
Two blowers to provide
recirculating airflow from the sides of heat chamber to the
top
-
Temperature range to 450°
(232° C); rated 12 KW @ 600 volts/3ph)12amps (other voltages
available)
-
Temperature is controlled by
a digital controller
|
 |
|
No sleeve detect and container reject
conveyor (requires UV marked sleeve) |
|
|
Complete conveying systems |
|
|
Motorized Height
Adjustable Stand
The Stand adjusts up and down by a
control panel. |
|
| |
|
| |
|
|
|
